Maui Electric Upgrading Olinda and Pi‘iholo Powerlines

June 26, 2019, 12:33 PM HST · Updated June 26, 12:33 PM
0 Comments
×

Maui Electric Company is upgrading utility poles and is using new insulated conductors in parts of Olinda and Pi‘iholo to prevent wind and tree-related outages.

The installment is part of a pilot project designed to make the island’s electrical grid more resilient.

The mile-long stretch of power lines in the heavily forested area will be the first in Maui County to use “spacer cables” designed to withstand the force of falling branches and trees.

Last year, branches and trees falling onto power lines caused nearly 30% of all outages. Most of these outages affected about 2,600 customers in the Olinda-Piʻiholo area when large limbs or entire trees fell onto electrical equipment.

    +
    SWIPE LEFT OR RIGHT
    SPONSORED VIDEO

    “While we proactively manage vegetation encroaching on powerlines, this Upcountry area is serviced by power lines surrounded by protected groves of pine and eucalyptus trees that often come down during high winds or storms,” said Chris Reynolds, system operations director at Maui Electric. “The spacer cables are being installed on spans where trees are prone to falling on the electrical equipment and causing extended outages.”

    Known as the Hendrix Aerial Cable System, the cables consist of three coated conductors supported by a heavy-gauge wire that provides structural support. The cables are cinched into polyethylene spacers placed every 30 feet along the spans to prevent the cables from touching, even under extreme stress. The system does not require cross arms or a neutral wire on the poles, reducing visual impact.

    The cable spacers are specifically engineered to withstand high winds, falling trees, and long installation spans where undergrounding electrical equipment isn’t practical.

    ADVERTISEMENT

    As part of the eight-week construction project, crews replaced about a mile of power lines stretching across 22 spans and replaced 15 poles with ones rated for higher wind gusts. For several spans over particularly steep terrain where a bucket truck could not be used, crews used climbing gear to ascend the 45-foot poles and a seat harness that fastens the lineman directly to the heavy-gauge support wire. For workers to safely complete the installation, planned outages were scheduled and communicated to affected customers.

    “We’re always looking for ways to strengthen our electrical system with resilient energy solutions, especially as our islands are experiencing increasing and intensifying storms,” Reynolds said. “Installation of stronger poles and the spacer cables designed to weather the elements mean we can bounce back faster to restore power to one of the more remote communities after a storm.”

    The pilot project will expand in the future to include an area in Lahaina and parts of East Molokaʻi. The system is also being evaluated for use on Oʻahu and Hawaiʻi Island.

    Maui Electric Company upgraded about a mile of current power lines with new insulated conductors in targeted pockets of Olinda and Pi‘iholo as part of a pilot project to prevent wind and tree-related outages and ongoing efforts to make the island’s electrical grid more resilient. PC: Maui Electric Company.

    For several spans over particularly steep terrain, a bucket truck could not be utilized, and a lineman was harnessed to a heavy-gauge support wire nearly 45 feet above the ground to complete the installation of the new system. PC: Maui Electric Company.

    A Maui Electric lineman is harnessed to a heavy gauge support wire to install the cable spacers. PC: Maui Electric Company.

    ADVERTISEMENT

    Print

    Share this Article

    BREAKING NEWS 
    TEXT ALERTS
    Sign up to receive important news alerts like tsunami warnings,
    floods, traffic accidents, road closures and more.
    Phone # (xxx-xxx-xxxx):
    E-Mail:
     

    Weekly Newsletter

    ARTICLE COMMENTS ( 0 )
    View Comments